ASUS F2A55-M LK AMD AHCI/RAID Driver
View and Download Asus F2AM LK Series user manual online. LK PLUS SATA Gb/s connectors • These connectors are set to AHCI mode by default. using these connectors, set the type of the SATA connectors in the BIOS to [RAID]. F2AM LK PLUS English BIOS Version: CPU Type: AMD AK. ASUS motherboards using the AMD® A55 chipset employ precise digital voltage regulation for the APU, called DIGI+ VRM (Voltage Regulation Modules) digital Missing: AHCI/ RAID. Refer to for the AMD® APU support list. Chipset. AMD® A55 AMD® A55 FCH: 4 x Serial ATA Gb/s connectors support RAID 0, RAID 1, RAID 10 F2AM LK Series specifications summary. Specifications are These connectors are set to AHCI mode by default. If you intend to.
|Supported systems:||Windows 10, Windows 8.1, Windows 7|
|Price:||Free* [*Free Registration Required]|
ASUS F2A55-M LK AMD AHCI/RAID Driver
Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.
Information on URL below
Before you install or remove any component, switch off the ATX power supply and detach its power cord. Failure to do so may cause severe damage to the motherboard, peripherals, or components. This is a reminder that you should ASUS F2A55-M LK AMD AHCI/RAID down the system and unplug the power cable before removing or plugging in any motherboard component.
The illustration below shows the location of the onboard LED. Product introduction 17 1.
The edge with external ports goes to the rear part of the chassis as indicated in the image below Screw holes Place six screws into the ASUS F2A55-M LK AMD AHCI/RAID indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard.
ASUS F2AM LK PLUS драйверы
Place this side towards the rear of the chassis. Product introduction 19 1.
The APU fits in only one correct orientation. Product introduction 21 1.
ASUS F2AM LK AMD AHCI/RAID Driver download AMD driver - - AMD RAID/AHCI Driver V3
Product introduction 23 1. DDR3 modules are developed for better performance with less power consumption. You may install varying memory sizes in Channel A and Channel B. The system maps the total size ASUS F2A55-M LK AMD AHCI/RAID the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
We recommend that you install the memory modules from the blue slots for better overclocking capability.
Check with the retailer to get the correct memory modules. Due to the memory address limitation on bit Windows OS, when you install 4GB or more memory on the motherboard, the actual usable memory for the OS can be about 3GB or less. For effective use of memory, we recommend that you do any of the following: The default memory operation frequency is dependent on its Serial Presence Detect SPDwhich is the standard way of accessing information from a memory module.
Under the default state, ASUS F2A55-M LK AMD AHCI/RAID memory modules for overclocking may operate at a lower frequency than the vendor-marked value. To operate at the vendor-marked or at a ASUS F2A55-M LK AMD AHCI/RAID frequency, refer to section 2. For system stability, use a more efficient memory cooling system to support a full memory load 2 DIMMs or overclocking condition.
AMD SATA Controller Drivers Download for Windows 10, 8, 7, XP, Vista
MHz capability Vendors Part No. Product introduction 25 DDR O.
Supports one module inserted into any slot as Single-channel memory configuration. Supports two modules inserted into both the blue slots as one pair of Dualchannel memory configuration.
Product introduction 29 1. The following sub sections describe the slots and the expansion cards that they support.
Unplug the power cord before adding or removing expansion cards.